Welding Inspector / Deputy Coordinator
Pretoria, South AfricaCompany
Penbro Kelnick (Pty) Ltd
Location
Pretoria
Posted
15 days ago
Via
PNet
Apply On
Job Description
Introduction
Penbro Kelnick Pty Ltd, part of a large international industrial group, is a specialised engineering and manufacturing company based in Hermanstad, Pretoria West.
We have a permanent position for an Welding Inspector/Deputy Welding Coordinator in the SHERQ Department. If you believe you meet the requirements for this position, then we would appreciate your application.
Duties & Responsibilities
• Inspect weldments to determine if they meet specifications and standards.
• Conduct dimensional checks after fit-up.
• Conduct checks at intervals during welding, as well as dimensional checks to identify distortion.
• Conduct VT and PT inspections.
• Management of external inspection services.
• Document all inspections, computations, results, and feedback provided.
• Validation of welding equipment.
• Participation in technical reviews and audits.
• Support the RWC in maintaining ISO 3834 & EN 15085
• Incoming inspection of materials and consumables.
• Validate welding materials and consumables against certificates and requirements.
Desired Experience & Qualification
• Welding coordinator with basic technical knowledge (Level C) IWS (International Welding Specialist) required.
• Reading and interpretation of engineering & welding drawings.
• Welding specifications and standards
• Quality Management experience
• ISO 9712 Level 2 NDT qualification for VT & PT will be advantageous.
• A welding or engineering background will be of advantage.
• Good eyesight is a requirement for VT (Visual Testing).
• Supervision and technical planning
Package & Remuneration
• Market competitive TCOE remuneration package
• Paid leave
• Pension Fund
• Medical
Interested?
Kindly note that only short-listed candidates will be corresponded with.
Penbro Kelnick is an Employment Equity Employer that gives preference to suitably qualified candidates who add to the diversity of the company.
Should you not have had any feedback within 1 (one) week after the closing date, you may consider your application unsuccessful.
The company is under no obligation to fill this position.
Penbro Kelnick Pty Ltd, part of a large international industrial group, is a specialised engineering and manufacturing company based in Hermanstad, Pretoria West.
We have a permanent position for an Welding Inspector/Deputy Welding Coordinator in the SHERQ Department. If you believe you meet the requirements for this position, then we would appreciate your application.
Duties & Responsibilities
• Inspect weldments to determine if they meet specifications and standards.
• Conduct dimensional checks after fit-up.
• Conduct checks at intervals during welding, as well as dimensional checks to identify distortion.
• Conduct VT and PT inspections.
• Management of external inspection services.
• Document all inspections, computations, results, and feedback provided.
• Validation of welding equipment.
• Participation in technical reviews and audits.
• Support the RWC in maintaining ISO 3834 & EN 15085
• Incoming inspection of materials and consumables.
• Validate welding materials and consumables against certificates and requirements.
Desired Experience & Qualification
• Welding coordinator with basic technical knowledge (Level C) IWS (International Welding Specialist) required.
• Reading and interpretation of engineering & welding drawings.
• Welding specifications and standards
• Quality Management experience
• ISO 9712 Level 2 NDT qualification for VT & PT will be advantageous.
• A welding or engineering background will be of advantage.
• Good eyesight is a requirement for VT (Visual Testing).
• Supervision and technical planning
Package & Remuneration
• Market competitive TCOE remuneration package
• Paid leave
• Pension Fund
• Medical
Interested?
Kindly note that only short-listed candidates will be corresponded with.
Penbro Kelnick is an Employment Equity Employer that gives preference to suitably qualified candidates who add to the diversity of the company.
Should you not have had any feedback within 1 (one) week after the closing date, you may consider your application unsuccessful.
The company is under no obligation to fill this position.
More Jobs
Tungsten Inert Gas (TIG) Welder - Gauteng, Pretoria East
Motorecruit · 3 days ago
Welder
Work-Force · 3 days ago
welder
Isilumko Staffing · R 75–R 100 an hour
Immediate Start: Welder
Recruite Agency · 3 days ago
Boilermakers/Fabrication Welders
Boardroom Appointments · 3 days ago
Semi-Skilled Plastic Welder
UMULIG ENGINEERING · 15 days ago
Frequently Asked Questions
Quick answers about Welder Jobs in South Africa
What is the national minimum wage for welders in South Africa in 2026?
The national minimum wage for all ordinary hours of work, including for welders, is R30.33 per hour effective 1 March 2026. This amounts to R5,914 per month for a standard 195-hour month. Overtime is paid at 1.5 times the normal rate up to 15 hours per week.
What salary can I expect as an entry-level welder with N2 qualification in South Africa in 2026?
Under the Metal and Engineering Industries Bargaining Council agreement effective 2024-2026, entry-level welders with N2 hold a minimum wage of R22,500 per month as of 1 July 2026. Qualified artisan welders earn R32,800 per month minimum. These rates apply to covered sectors like manufacturing.
What work visa do foreigners need for welder jobs in South Africa?
Foreigners require a General Work Visa sponsored by a South African employer offering a position on the labour market test. The visa is issued for up to 5 years and requires proof of qualifications equivalent to South African standards plus a job offer at market-related salary of at least R30,333 per month in 2026. Processing takes 8-10 weeks via VFS Global.
What qualifications and experience are required for welder jobs in South Africa?
A minimum N1-N3 technical certificate in welding or boiler making plus 18-24 months apprenticeship and a passing trade test (Red Seal) is required for artisan welder positions. Entry-level roles accept Grade 12 with N2 and 6 months on-the-job training. Registration with merSETA is mandatory for certification.
Latest Articles
